The actuator moves the vanes or other air control elements to any position between the HEAT and COOL positions.

The control input signal is an electrical signal.

All extras The components are determined in accordance with the order code of the air distribution device.

Design elements and characteristics

Mechanical stops for adjusting the air supply angle
Supply voltage 24 V AC/DC
Rotary and linear drives for overload protection
Setpoint signal 2 – 10 V DC
Release button to switch to manual mode

Optional equipment

TDC temperature control module

Application

Drives for modulating control
Modulating operating mode of adjustable air distribution devices
Adjusting the direction of air supply

E3

Application

Actuator series NM24A-SR for changing the direction of air supply for air distribution devices of the VD, VDR, VDL and DUK series

Design elements and characteristics

Supply voltage 24 V AC/DC
Control input signal: Setpoint value 2 – 10 VDC, corresponding to full rotation range (90°), operating range limited by mechanical limiters
Output: Actual value signal 2 – 10 V
Mechanical stops for adjusting the air supply angle
Reverse operation possible
Lock with lock for connection to the valve flap shaft
Release button to switch to manual mode

E6

Application

Drive series 223F-024-150-001
For operation in modulating mode and for switching between heating and cooling modes of air distribution units of the QSH, ISH and DUK series
Linear actuator for concealed installation inside air distribution units; ideal solution for surface-mounted devices

Design elements and characteristics

Supply voltage 24 V AC/DC
Input control signal: Set value signal 0 – 10 V
Mechanical stops for adjusting the air supply angle
Reverse operation possible

E9

Application

CM24-SX-F series actuator for changing the direction of air supply for air distribution devices of the TJN series

Design elements and characteristics

Supply voltage 24 V AC/DC
Input control signal: Set value signal 0 – 10 V
Mechanical stops for adjusting the air supply angle
Lock with lock for connection to the nozzle axis
Trip magnet

All extras The components are determined in accordance with the order code of the air distribution device.

E3

Application

Actuator series NM24A-SR for changing the direction of air supply for air distribution devices of the VD, VDR, VDL and DUK series

Design elements and characteristics

Supply voltage 24 V AC/DC
Control input signal: Setpoint value 2 – 10 VDC, corresponding to full rotation range (90°), operating range limited by mechanical limiters
Output: Actual value signal 2 – 10 V
Mechanical stops for adjusting the air supply angle
Reverse operation possible
Lock with lock for connection to the valve flap shaft
Release button to switch to manual mode

E6

Application

Drive series 223F-024-150-001
For operation in modulating mode and for switching between heating and cooling modes of air distribution units of the QSH, ISH and DUK series
Linear actuator for concealed installation inside air distribution units; ideal solution for surface-mounted devices

Design elements and characteristics

Supply voltage 24 V AC/DC
Input control signal: Set value signal 0 – 10 V
Mechanical stops for adjusting the air supply angle
Reverse operation possible

E9

Application

CM24-SX-F series actuator for changing the direction of air supply for air distribution devices of the TJN series

Design elements and characteristics

Supply voltage 24 V AC/DC
Input control signal: Set value signal 0 – 10 V
Mechanical stops for adjusting the air supply angle
Lock with lock for connection to the nozzle axis
Trip magnet