
XARTO SERIES
Round and square ceiling swirl diffusers for high air flow rates with low sound power levels and pressure drops
Standard sizes 600, 625
Air flow level 31 – 265 l/s or 110 – 954 m³/h
Front panel made of galvanized sheet steel with powder coating
For supply and extract air
For systems with variable and constant air flow
Suitable for all types of ceilings, also suitable for free hanging when fitted with an edge panel
Vortex element inside the structure for the best vortex flow and high ejection levels
Plenum chamber with optimal acoustic characteristics and closing damper blade
Ideal for comfort zones
Additional equipment and accessories
The diffuser front panel can be painted in RAL CLASSIC colors
Description
Ceiling swirl diffusers in air conditioning systems create a vortex supply of air for good mixing with the room air. The air flow obtained at the outlet of the diffuser allows one to achieve high ejection values, thereby quickly reducing the flow rate and leveling out the temperature difference between the supply air and the air in the room. Ceiling swirl diffusers are used for high air flows. As a result, there is a mixing of air flows in comfort zones, with a good distribution of air jets throughout the room and a small turbulent vortex in the area where people are present.
Designer ceiling swirl diffusers are distinguished by the presence of a front panel with a characteristic pattern. The vortex element required for vortex air distribution is located inside the static chamber and is invisible in the room.
Ceiling swirl diffusers of the XARTO series have fixed guide vanes. Horizontal air supply is carried out in all directions. The temperature difference between the supply air and the room can range from –12 to +10 K.
Flap blade for balancing air flow simplifies operation.
To create an attractive, holistic room design, XARTO series diffusers can also be used for exhaust ventilation.
Standard sizes 600, 625 mm
Min. air flow, where ΔtZ = -6 K 31 – 43 l/s or 110 – 155 m³/h
Max. air flow level, at LWA ≅ 50 dB(A) 220 – 265 l/s or 792 – 954 m³/h
Temperature difference between supply air and room –12 to +10K
Characteristics
For the highest demands in technology, comfort and design
Faceplates for various design solutions
Suitable for all types of ceilings, also suitable for free hanging when fitted with an edge panel
Horizontal duct connection
Materials and coating
Front panel, plenum box and jumper made of galvanized sheet steel
Swirl element, pipe and valve blade are made of ABS plastic, UL 94, V-0, flame retardant
Flow equalizer made of synthetic fiber
Double seal made of rubber
The front panel is powder coated RAL9010, white
P1: Powder coated, RAL CLASSIC color
Specifications
Standard sizes: 600, 625 mm
Min. air flow level, where ΔtZ = -6 K: 31 – 43 l/s or 110 – 155 m³/h
Max. air flow level, where LWA ≅ 50 dB(A): 220 – 265 l/s or 792 – 954 m³/h
Temperature difference between supply air and room: –12 to +10 K

① Diffuser front panel
② Center connection screw
③ Swirl element (only for supply air)
④ Valve blade for balancing air flow
⑤ Connection
⑥ Double seal
⑦ Hanging bracket
⑧ Flow equalizer (supply air only)
⑨ Jumper