FMS SERIES
Self-powered electronic monitoring system for fume hoods. Easy to install, expand and commission thanks to plug-in connections.
Connectors for the most important connections are located on the outside of the case.
The monitoring hardware can be expanded using modules.
Adaptable control panels for fume hoods
Innovative operation to support individual project requirements
Fan control input
Configurable monitoring and alarm functions
Easy installation thanks to EasyConnect interactive configuration software.
Power supply for 90–250 VAC supply voltage
You can connect 2 control panels, for example. for fume hoods with doors on both sides
Expansion options
Expansion modules for installation in or on the base housing.
Easy installation and electrical connection of the monitoring system.
Expansion modules can be installed at the factory or installed later.
Additional control of support flow in fume hoods
Functional Description
For fume hood monitoring, the EASYLAB FMS electronic monitoring system is usually installed on the roof or side of the fume hood. The included control panel is usually mounted on the side frame of the fume hood.
Main functions:
Fume hood monitoring by internal or external differential pressure measurement, including optical or acoustic alarm, according to EN 14175
The monitoring system complies with the requirements of EN 14175 and is therefore suitable for all fume hoods tested according to EN 14175.
Monitoring Strategies:
FMS-1
Function of the equipment – differential pressure, internal measurement: measurement of the differential pressure at a suitable measuring point using an internal static differential pressure sensor. Can monitor 2 pressure values
Function of the equipment – volume flow, internal measurement: measurement of volume flow at a suitable measuring point using an internal static differential pressure sensor. 2 volumetric flow values can be monitored
FMS-2
Equipment Function – Face Speed: Measuring face speed using the optional VS-TRD face speed sensor. Speed can be set
Function of the equipment – differential pressure, external measurement: measurement of the differential pressure at a suitable measuring point using an external differential pressure transmitter. Can monitor 2 pressure values
Equipment function – volume flow, external measurement: Monitor volume flow by measuring volume flow or differential pressure at a suitable measuring point using an external differential pressure sensor or an actual value signal from a volume flow controller. 2 volumetric flow values can be monitored
① Сигнализация тревоги в центральную BMS
② Датчик эффективного давления
S1 Створка оконного проема, EN 14175
S2 Объемный расход 1/2